Building Energy Use
#DSC_0474 Our everyday activities – plug-load from equipment such as computers and copiers and lighting – typically account for roughly 30-40% of a building’s energy use and the resulting carbon emissions. The remaining energy use and emissions are due to building design, construction, and daily systems operation. Overall energy consumption in UF buildings accounts for over 75% of UF’s carbon footprint. In fiscal year 2010-11, UF used 440.2 million kilowatt hours of power, down from 446.6 million in 2007-08. This reduction occurred despite the university adding nearly 1 million square feet of new building space in that same time period.
A large majority of UF buildings are cooled through a chilled water utility produced by UF’s Physical Plant Division (PPD). This system cools the supply air to 55 degrees. Each building is different, but many have a re-heat type system that uses heated, piped steam to heat the air back up to the desired air temperature set for the zone or space. Having a cooler temperature setting actually saves energy by not reheating the air. However, we must reheat to a level of comfort for the occupants. Currently, in our humid climate, this is the best way we have of removing the humidity from the air to keep our buildings healthy, and free of mold and mildew. We are continuously trying to improve our systems by increasing comfort and unit efficiency, while still focusing on decreasing energy consumption.
PPD has had a program in place for several years to reduce energy consumption by re-commissioning buildings, retrofitting the chilled water loops and replacing lighting systems. Additionally, they schedule temperature set-backs for the heating, ventilating and air conditioning (HVAC) systems in buildings when they are unoccupied. Building setback programs are also in full effect during the holiday season.
The most energy intensive spaces on campus are research laboratories. Fume hoods are big energy hogs and much of the equipment used in research is also energy intensive. We are working to develop a program to help researchers curb some of this energy use through behavior.
In 2011, the O’Connell Center Parking garage was retrofitted with Induction lighting. Induction is fluorescent lighting without any electrodes or electrical connections to the inside of the tube, meaning the energy is transferred via an inductive coil. Since there are no electrodes, there is very little degradation by turning on and off the lights like traditional fluorescent lighting, so these lights are rated to last 100,000 hours.
Buildings & Grounds
- Biodiversity & Conservation
- Building Energy Use
- Energy & Climate Change
- Food & Dining
- Neutral UF Coalition Program
- Service, Outreach & Extension
- Social Equity & Well Being
- Topic Information by Keyword