WelcomeThe University of Alabama (UA) Board of Trustees in their meeting on February 3, 2006 has approved the formation of "Center for Nanoscale Materials and Biointegration (CNMB)". This new center at University of Alabama at Birmingham (UAB) is housed in the Department of Physics with participation of faculty from the College of Arts and Sciences, School of Business, School of Dentistry, School of Engineering, and School of Medicine.
CNMB is a world-class interdisciplinary research and student training center focusing on the synthesis and characterization of nanoscale materials with broad applicability in materials under extreme environments, nano-enabled biomedical imaging and drug delivery platforms, and nanostructured coatings and materials for biomedical implants and vascular grafts. CNMB is also actively involved in partnerships for innovation with Birmingham Business Alliance and small businesses to translate lab-based discoveries in to viable commercial products and promote technology-based economic development of the seven-county Birmingham region
Congratulations to BME graduate, Harsh Patel for being recognized by the Biomedical Engineering Department for outstanding graduate student of the year. Harsh has also won outstanding graduate student for the UAB School of Engineering.
Patel’sPhD dissertation project title is “Bio-hybrid Tubular Electrospun Scaffold for Vascular Tissue Engineering”. Hel has received numerous honors and scholarships while also taking on a variety of leadership roles. During his time at UAB, Harsh has received the ALSAM Bridge to Doctorate fellowship, the Ireland Research Travel Scholarship, and a 2014 Graduate Student Association travel grant.
For his research, he has received the first placed award for the oral presentation at UAB’s 2013 graduate student research day. Harsh has presented his research in many local and national level conferences such as TERMIS. Harsh has mentored many undergraduate students and helped them to learn polymer characterizations techniques. Harsh has published as a first author a research journal article and a review book chapter during his PhD. Harsh is also co-authored on a published journal article. Harsh served as the 2012-2013 president of the Biomedical Engineering Graduate Student organization (BMEGS) at UAB. He also chaired the 2013 UAB Biomedical Engineering Symposium. Harsh is a member of Tissue Engineering International and regenerative medicine society, biomedical engineering society, Alpha Epsilon Delta pre-health honors society, and Tau Beta Pi honors engineering society.
CNMB Researchers Awarded NIH Innovation-Corps Grant ( Video)
CNMB Announces Opening of Cleanroom Fabrication Facilities
National Institutes of Health (NIH) Funds UAB-Vivo Biosciences Research Team in Vascular Grafts:
NIH-National Center for Advancing Translational Sciences (NCATS) has funded a UAB-Vivo biosciences research team for conducting translational research on vascular grafts led by Principal Investigator Yogesh K. Vohra, PhD. This Phase-I award of $192,314 is under the Small Business Technology Transfer (STTR) program. Approximately 1.4 million surgical procedures that require arterial prostheses are performed annually in the US due to peripheral vascular disease and ischemic heart disease; approximately 500,000 of these are coronary artery bypass operations. The current commercially available synthetic grafts have not been found suitable for small vessel (<6 mm) applications, with a <50% patency rate at 12 months. Disadvantages of prosthetic grafts include increased risk of thrombosis, poor tissue response and integration and poor biomechanics of graft, leading to additional interventions. Because there are no acceptable synthetic prostheses for small-diameter blood vessels, there is a huge demand for tissue engineered vascular grafts, especially small diameter vascular grafts for coronary replacement. The overall goal of this new program is the development and evaluation of a novel functionally-graded biohybrid vascular graft for small diameter for coronary bypass applications. Tissue engineered vascular constructs developed to date have been engineered mostly using synthetic and animal-derived biomaterials and require pre-seeding of cells before implantation to overcome the complications of prosthetic vascular grafts. However, these biohybrid systems exhibit many limitations including poor cellular adhesion, inadequate biomechanical and functional properties. The UAB research group has recently demonstrated an in vitro regenerated human endothelium on functionally-layered polymeric scaffolds containing bioactive proteins (Figure below). Moreover, Vivo Biosciences has developed a unique human biomatrix (HuBiogel™) that allows viable tissue constructs by cultivating single or multiple cell types. The research team will combine our functionally-layered graft strategy with this physiological HuBiogel culture technology for fabricating an advanced 3D vascular construct demonstrating enhanced lumen endothelialization and biocompatibility. Our research team includes Dr. Yogesh Vohra (PI, UAB Physics/College of Arts and Sciences) Dr. Vinoy Thomas (UAB MSE/School of Engineering) Dr. Steven Pogwizd (School of Medicine - Cardiovascular Disease)
and Dr. Raj Singh (President -Vivo Biosciences).
Electro-spinning apparatus for fabricating graft (left) and a 12 cm long vascular graft fabricated at UAB (right)
“CNMB member and a faculty member in the UAB Department of Chemistry Dr. Eugenia Kharlampieva has been awarded a National Science Foundation (NSF) Faculty Early Career Development Award entitled “CAREER: Shape Responses of Ultrathin Hydrogel Microcapsules” for a five year period 2014-2019. This is one of the National Science Foundation's most prestigious awards in support of junior faculty who exemplify the role of teacher-scholars through outstanding research, excellent education and the integration of education and research within the context of the mission of their organizations”
Congratulations to Sonal Singh and co-authors for their recently accepted manuscript. The paper entitled ”Spatially Controlled Fabrication of Brightly Fluorescent Nanodiamond-Array with Enhanced Far-Red Si-V Luminescence" (by Sonal Singh, Vinoy Thomas, Dmitri Martyshkin, Veronika Kozlovskaya, Eugenia Kharlampieva, and Shane Catledge) will appear in the Journal Nanotechnology. The paper will be available online to readers at http://iopscience.org/. This work demonstrates a novel approach to precisely pattern fluorescent nanodiamond-arrays with enhanced far-red intense photostable luminescence from silicon-vacancy (Si-V) defect centers.The precision-patterned pre-growth seeding of nanodiamonds is achieved by a scanning probe “Dip-Pen” nanolithography technique using electrostatically-driven transfer of nanodiamonds from “inked” cantilevers. The enhanced emission from nanodiamond-dots in the far-red is achieved by incorporating Si-V defect centers in subsequent chemical vapor deposition treatment. The authors anticipate that the far-red intense photostable luminescence (~738 nm) observed from Si-V defect centers integrated in spatially arranged nanodiamonds could be beneficial for the development of the next generation fluorescent based devices and applications.
CNMB Member Dr. Claudiu T Lungu Awarded a National Institute for Occupational Safety & Health Grant (CDC/DHHS R21, Total amount for two years: 09/01/2013 – 08/31/2015: $398,672)
The goal of this study is to develop a new technique that allows accurate sampling of gases and vapors at low levels.
Dr. Lungu is investigating a new process of using pulsed visible light to release chemicals from new substrates based on carbon nanotubes. These substrates will be used in air sampling devices for volatile organic compounds and gases for workplace or environmental monitoring. This research could potential lead to a new generation of air samplers that may be faster, cheaper, and more sensitive than the currently available models.
CNMB Member Dr. Eugenia Kharlampieva Awarded a National Science Foundation Biomaterials Grant
Immunomodulatory Ultrathin Multilayer Coatings for Pancreatic islet Transplantation NSF-DMR1306110, program of Biomaterials (BMAT)
This grant will supports the development of a novel type of cytoprotective material with controlled immunomodulatory and inflammatory responses to be used for cell-based transplantation therapy for diabetic recipients. This project is in collaboration between departments of Chemistry (Eugenia Kharlampieva, PI) and Microbiology (Hubert Tse, coPI). Although transplantation of pancreatic islet cells has emerged as a promising treatment for Type 1 diabetes, its clinical application remains limited due to adverse effects of immunosuppression and declining allograft function. The awarded project will develop a preclinical approach to preserve islet viability and function during culturing and transplantation by protecting pancreatic islets (cell clusters) with a novel polymer coating. These coatings will be designed through hydrogen-bonded assembly of cytocompatible macromolecules with antioxidant and anti-inflammatory characteristics. This project is particularly timely since current islet encapsulation systems are challenging for transplantations due to high cytotoxicity and the requirement for large injection volumes. The design of novel immunoprotective materials will open new prospects for developing biomaterials with unique characteristics having applications in various bio-related areas such as bioengineering and tissue engineering. The awarded project will develop interdisciplinary collaborative research which should stimulate awareness of the needs of the UAB biomedical research community for specialized polymer-based biomaterials as novel platforms for cell transplantation therapy.
CNMB Announces Nobel Laureate Dr. Roald Hoffmann Colloquium
National Institutes of Health Issues a Small Business Technology Transfer Phase II Award to Vista Engineering and UAB CNMB Scientists
National Institute of Dental and Craniofacial Research (NIDCR) has issued a two-year commercialization award entitled “Nanotechnology Enabled Temporomandibular Joint (TMJ) Prosthesis” to a Birmingham based company Vista Engineering and UAB CNMB researchers (Vista PI Dr. Raymond Thompson and UAB PI Dr. Yogesh Vohra, Dr. Aaron Catledge, and Dr. Patrick Louis). This award of $746,369 is for a two-year period starting August 15th, 2011. It is estimated that over 10 million people in the United States experience pain and dysfunction in and near the TMJ. Typical symptoms include facial and jaw joint pain, neck and shoulder pain, headaches, locking of the jaw, and limited opening or inability to open the mouth comfortably. The vast majority of these patients can be treated with conservative, non-invasive therapies. However, some patients with severe TMJ degeneration may require a prosthetic replacement. Implants have been used primarily to replace the articular disc of the joint and the condylar head of the mandible. However, long-term success and functioning of these implants remains a serious problem. Major factors contributing to the failure of TMJ devices include the choice of the design and materials of the implant, and the production of wear particles that can trigger a cascade of events that ultimately may result in the damage to TMJ structures. CNMB scientists and Vista engineering have been exploring the use of nanostructured diamond coatings on metallic components of TMJ to lower mechanical wear and improve clinical outcomes. The goal of this STTR Phase II program is to design a minimally invasive diamond-on-diamond articulating TMJ device using computational modeling approaches. This next generation of TMJ device will be fabricated and tested in a TMJ wear-simulator to have a service lifetime of more than ten-years of clinical use. The TMJ devices that show lowest mechanical wear in simulator studies will also be tested in an animal model. The clinical translational studies are planned to eventually allow testing of new TMJ devices for human use in the next few years.